Akülü Forklift

Akülü Forklift EPX 16 / 18 / 20 s

elektrikli forklift100 % AC 48V
4-Wheel Multi-Tire Lift Truck

EPX 16 3,000 lbs 1600 kg
EPX 18 3,500 lbs 1800 kg
EPX 20s 4,000 lbs 2000 kg

 

Operator cell

The lower step height, the steel step plate and all ergonomics are designed for customer’ s comfort and convenience. Large floorboard area accommodates large boots. The clear arranged display provides important truck information so that the operator is well informed and able to do safety work all the time.

Motor

All new AC-motors are fully enclosed to keep out dust and contaminates. Wet invironment is not an issue. No brushes have to be changed or commutator to turn over at the induction motors. Only serviceable parts are bearings and seals. All motors are equipped with a thermistor which constantly monitors temperature. Should the temperature approach the thermal limit, the control gradually cuts back current. Limiting current does not limit maximum travel speed. Once motor temperature decreases, full power is automatically restored. Operator may never feel the cut-back. Latest Zapi-AC-system is minimizing ernergy consumption.

Brakes

Regenerative braking returns energy into the battery, not into the brakes in the form of heat and is standard on the EPX. This is accomplished one of three ways; via releasing the accelerator pedal, changing direction of travel or applying the service brake. Using regenerative braking also prolongs the life of the truck’s service brakes.

Steering

Because of its hydrostatic steering system the EPX 16/18/20s is easily maneuverable.

Hydraulic system

One AC motor for lifting and steering operation. A flow control valve ensures that steering has priority. Linear potentiometer on lift handle provides fully proportional lift. At conserving energy, motor only runs as fast as needed. Motor speed can be adjusted to meet attachement needs. The pump motor is designed to reduce steering and lift noise.

Upright

Sealed and canted rollers minimize deflection and free-play in both the upright and carriage. Six carriage load rollers spread out the load significantly improving roller life. Side thrust rollers help prevent racking during off-center loading and massive high-strength steel fork bars significantly extend component life. Visibility is critical to an operator’s performance and safety. CLARK’s nested upright rails provide positive rail interlock and narrow “column“ to maximize the vision window. The overhead guard safety bars run parallel to the operator’s line of sight. This results in less product damage when picking and pulling loads from rack locations. A clear, unobstructed view also protects your most valuable asset – your employees.

Miscellaneous standard

A complete light package and an amber strobe beacon lamp, a multi-function diagnostic dash display with hour meter and battery discharge indicator with lift interrupt is standard. The standard painting is CLARK-green, the operator’s compartement and upright is black.

Supplementary equipment

Great assortement of supplementary equipment is available. It is possible to set up the truck performance to customer’s requirement.

Safety

The ramp start feature provides additional torque to eliminate roll back when starting on an incline. EPX-series has an CE-certificate and conforms to european safety standards.


Applications:

  • Manufacturing
  • Warehousing

Features and Options:

  • Totally sealed and environmentally protected transistor (G.E CTS 450) controls.
  • New technology separately excited drive motors (SEM) offer high start-up torque and strong mid-range torque for greater gradeability and speed control
  • EPG has a special frame designed specifically for side battery removal
  • On Demand Power Steering Reduces noise and save energy as the system is activated only when the driver operates the steering wheel. (Option)

HIZLI İLETİŞİM

 Ümit Mahallesi Kemalpaşa Caddesi No:349/A Pınarbaşı, Bornova, İZMİR

 +90 232 478 4007

 +90 232 478 4008